Bogen UTI1 Manual do Utilizador

Universal Telephone InterfaceUTI1 ModelInstallation and Use Manual© 2004 Bogen Communications, Inc.All rights reserved.Specifications subject to chang

10Override InputThe Override is a non-programmable feature that lets the caller take priority over all paging functions and make apage to all speakers

11Other ConnectionsNight RingerThe UTI1 night ringer signaling feature is designed to alert personnel to incomingcalls after normal business hours.The

12ControlsPaging LevelThe UTI1 has controls for adjusting the audio level of eachoutput independently. These serve as master level controls thatallow

13TonesPre-Announce/Confirmation ToneThis tone can be set to be heard at the speakers being paged or the calling telephone or both. It is either a chi

14System ProgrammingSystem programming lets you set certain UTI1 options and tone features using the DTMF keys of a telephone.Allprogramming is accomp

15AUX Relay ContactThe UTI1 allows the installer to program a number of different parameters to control the way in which the AUXrelay contacts activat

16Example 1: Emergency Tone/Emergency Announcement BypassThe tone trigger and override inputs are used to provide emergency tones and live emergency

17Feature Codes & DefaultsFeatureFeatureCodeData DefaultPre-Announce /Confirmation ToneHandset & OutputsHandset onlyOutputs onlyInhibitBeepChi

18SpecificationsInput Impedance: 600 ohmsInput Level: -10 dBm nominalVOX Sensitivity: -30 dBmMusic Source Input Impedance: 8 to 600 ohmsMusic Input Le

19Block Diagram

© 2004 Bogen Communications, Inc.All Rights Reserved. Printed in Taiwan.NoticeEvery effort was made to ensure that the information in this manualwas c

50 Spring Street, Ramsey, NJ 07446, U.S.A.Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.comLimited WarrantyThe UTI1 is warranted to be free from def

ContentsUTI1 Feature Callouts ...4Introduction.

4UTI1 Feature Callouts1. Power Indicator - Illuminates when AC power has been applied to the unit.2. AUX Contact Terminals - Provide connections for n

5IntroductionThe UTI1 Paging System is a paging and signaling system.The system provides the following features and functions:Voice Channel• Single-zo

InstallationWall MountingMounting to a plywood backboard or studs:1. Hold the unit level against the surface to which it will be mounted.2. Mark where

Telephone InterfaceWiring Connections & SetupTelephone System ConnectionsThe UTI1 connects to virtually any telephone system: PBX station lines an

8PBX Ground Start Trunk PortIn this configuration, the unit supplies 24V talk battery, a contact in the Tip circuit, and loop current detector in ther

9PBX Page Port VOXIn this configuration, the unit activates when audio on the page input is detected. Loss of audio allows the VOX timerto expire and