Bogen CAM8 Manual do Utilizador descarregar pdf (Página 16)

Fine Tuning

Low Cut Switch

To remove excessive bass from an individual channel, press the Low Cut Switch (1) for that

channel.

This feature helps eliminate low frequency noise (signals of 150 Hz and below, such as back-

ground rumble from ventilation systems, etc.) and is used primarily with mic-level input. It is

particularly effective when handheld mics are used.

Phantom Power

If condenser microphone(s) is not independently powered, press Phantom Power Switch

(2) to the “on” position.

The phantom power switch will power condenser (capacitor) mics through the mic cable.

Depressing the button applies phantom power to all channels set to mic-level

simultaneously.

Cut

Low

M.A

BUS

M.A

Off

Power

Ground

Phantom

18VCT

Page 16 of 32

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sem comentários

Bogen CAM8 Manual do Utilizador Página 16