Bogen CM-810 Instruções de Operação descarregar pdf (Página 55)

Operation

GMS810-/GMS811-FIDOR · Operating Instructions · 8013911 V1-0 · © SICK AG 55

Subject to change without notice

5.3 Starting important operating sequences

5.3.1 Check and adjustment with test gas

Step Action Reference

1 Connect zero and reference gas.



p. 23, §3.4

2 Switch device to “Maintenance”: Menu Maintenance/Mainte-

nance mode/Maintenance mode.



p. 51, §5.2.8.2

3 Set reference gas parameters: Menu Parameter/Reference gas.



p. 46, §5.2.6.3

4 If necessary, set gas timing parameters: Menu Parameter/Gas tim-

ing.



p. 47, §5.2.6.7

5 Start zero and reference point adjustment: Menu Adjustment/Zero

+ reference



p. 48, §5.2.7.2

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 77 78

GMS810-/GMS811-FIDOR 1
Document Information 2
Warning Symbols 2
Warning Levels 2
Information Symbols 3
Contents 4
1 Important Information 7
Main hazards 8
Intended use 8
Responsibility of user 9
Important Information 10
2 Product Description 11
Product identification 12
Characteristics of FIDOR 12
Method of operation 13
Functional units 13
Measuring principle 14
Remote control 15
Interfaces 15
SOPAS ET (PC program) 16
Gas flow plan 17
Instrument air 18
Combustion air 18
Fuel gas 18
Test gas 18
Sample gas 19
Product Description 20
3 Installation and Connection 21
Scope of delivery 22
Installing 22
Connecting the instrument air 24
Connecting the combustion air 24
Connecting the test gases 24
Connecting the sample gas 25
Connecting the gas outlet 25
Electrical installation 26
Signal connections 27
Installation and Connection 28
Ethernet interface 29
Connecting the power supply 29
4 Start-up 31
Preparation 32
Start up the FIDOR 32
5 Operation 33
Status, LEDs 34
Assignment of buttons 35
Menu tree 36
XXXX 37
FIDOR menus 38
Measuring display 41
“List” measuring display 41
Diagnostic 42
.4.2.2.1 43
Operation 44
5.2.5.5 Telediagnostic 44
Parameter 45
5.2.6.7 Gas timing 47
5.2.6.8 Application area 47
Adjustment 48
5.2.7.8 Drift reset 50
1 Select “Drift reset” 50
2 Confirm with <Set> 50
Maintenance 51
5.2.8.3 Test gas 52
5.2.8.4 Standby 52
5.2.8.5 Configurations 52
Factory setting 53
5.2.9.3 Heated line 54
6 Shutdown 57
Preparations for shutdown 58
Shutdown procedure 58
Disposal 58
7 Scheduled Maintenance 59
Maintenance intervals 60
Scheduled Maintenance 62
8 Clearing Malfunctions 63
Replacement of fuses 64
FID does not ignite/burn 65
Error messages 66
Clearing Malfunctions 67
9 Technical Documentation 69
Approvals 70
Heated line 71
Dimensions 72
Technical data 73
Technical Documentation 74

Comentários a estes Manuais

Sem comentários

Bogen CM-810 Instruções de Operação Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico Bogen CM-810