Bogen X600 Especificações

Black Max™AmplifierX300, X450, & X600 ModelsInstallation and Use Manual© 2005 Bogen Communications, Inc.All rights reserved.54-2063-01D 0910

ConnectionsSpeakers70V "Transformer-Coupled" SpeakersThe Black Max series was designed to drive only 70V constant voltagetype speaker loads.

Sequential Turn-OnSequential Turn-On OperationBlack Max amplifiers contain a sequential turn-on feature that is designed to turn on a bank of Black Ma

OperationFront Controls & IndicatorsPower SwitchThe Power Switch for the Black Max amplifier is located on the front of theunit. Press the "I

OperationSleep SwitchThe Black Max amplifier includes a sleep mode feature that greatly reducesthe power consumption of the amplifier after it has bee

Troubleshooting10• Power Switch OFF• Breaker (Power Switch) tripped- Turn off, then turn back on• Power Sequencing Switch set wrong- Check Sequential

Specifications* Both channels driven at nominal line voltage 120V AC, 60 Hz.** The X600 requires a 20A, 125V AC power receptacle because its maximum c

50 Spring Street, Ramsey, NJ 07446, USATel: 201-934-8500; Fax: 201-934-9832www.bogen.comLimited Warranty; Exclusion of Certain DamagesBogen Black Max™

NoticeEvery effort was made to ensure that the information in thisguide was complete and accurate at the time of printing.However, information is subj

ContentsPageINTRODUCTION...1Package Conte

iii

IntroductionBogen's Black Max™ amplifiers deliver on what professional sound installers need most: Power and Reliability. PowerWith three differe

Panel DescriptionsBlack Max Front Panel1. Status Indicators - The Status LEDs are multi-purpose indicators, one for each channel.Green - Amplifier is

Panel DescriptionsBlack Max Rear Panel1. Speaker Terminals - Connects to 70V constant voltage speaker loads. One set for each amplifier section. Acce

InstallationMechanical Components1. Rack Ears - Prior to installing the amplifier into a 19" rack, you will need to attach the rack ears. Remove

InstallationVentilationThe Black Max amplifiers were designed to be placed on a table or rack-mounted. For rack-mounted applications,the amplifiers ca